Gens ace 5300mAh 3S 100C HV 11.4V Battery - The ideal match for Losi 8IGHT-X Super Lasernut, click to reach the battery details >>

How to clean drones and fix drones

Jul 1st 2016

If you are a fan of drones, please remember to maintain the drone and other component. Preventing the dust and dirt is a very crucial immediate step of you. Actually, there is small difference between it and for various design. So there is a special system, but there are some other methods to clean the drone and to make it in the best condition. Within the following, we would learn how to clean the drones. First, you should prepare a tool-kit, and put all the fixing, cleaning, maintenance stuff into it. Remember to match the stuff with the drone's brand and model.

The must-have tools for cleaning drones

1. a soft cleaning brush

This is for some corners and gaps, and you can also use the pipeline pigging.

2. canning compressed air

This can clean the dirt of some "sensitive parts" such as the electric motor or circuit board around, which would not damage the drones.

3. isopropyl alcohol

This can clean your drone shell in perfect condition, which can wipe out grass stains, blood stains and any other kind of dirt, and would not damage the circuit.

4. ultra-thin fiber cloth

If you want to completely clean the drone by dismantling it, it is necessary to use this cloth as it can perfectly match the isopropyl alcohol.

5. three-in-one all-purpose lubricant

Carry a bottle of three-in-one all-purpose lubricant in case of emergency.

Tattu battery and drones The must-have tools to fix the drone

It is possible to have trouble while the drone is flying or landing. As it is a precise device, any tiny change would influence its flying status and longevity. Therefore, it is wise to prepare needed tools and carefully deal with the drone's failure.

1. spare bracket

the bracket is one of the most important components of flying the drone. Once it has trouble, the drone should land immediately and replace the original bracket with the spare one.

2. tool kit

Remember to prepare all kinds of tools that can fix all the possible troubles. Maybe your drone is too advanced to have trouble or there's a matched and attached tool kit when you buy the drone, but you still need to take a screw-drive.

3. soldering iron

while you would not take the soldering iron with you all the time, there would be not better than having a soldering iron when the electronic failure happens. Compared with the amateur, the professional pilots always take the soldering iron. However, if you have never used the soldering iron before, it's better to search help from your friends or watch the guide video.

4. spare battery

If your drone has available spare multicopter battery, please fully charge it.

The notes for the greenhands:

1. Please check whether the ground is spacious enough; whether your drone is in good condition; whether the switch of the remote control is flexible. 2. Keep your 16000mah lipo battery be in full charge. 3. Keep your drone clean. 4. Do not fly the drone for too long.