$10 Off Order Over $110


$20 Off Order Over $198


$35 Off Order Over $298

Tattu dual smart charger 60A/3000W for 12S-14S Tattu Smart battery

(No reviews yet) Write a Review
Part #:
< 20

This charger is capable of charging 2 sets of lithium batteries simultaneously. The maximum power output is 1200 watts per channel. User can select between Charging and Maintenance mode.


The TA3000 charger is equipped with intelligent features that enable it to recognize the Tattu 12S/14S with AS150U smart batteries. It automatically recognizes the parameters of the connected battery and can perform charging and discharging functions without manually setting it, and can detect the state of charge, state of health, and temperature of the batteries while adjusting the charge current accordingly. It has more functions such as over-temperature protection, overcurrent protection, overcharge protection, disconnection protection, and fast balancing.

In conclusion, it's made to extend the life span of the batteries.


Output Voltage: AC100-240V 50/60Hz

Channels: Two

Charge Power: AC220V max 3000W; AC110V max 1200W

Charge Current: Max 60A

Discharging Power: Max 70W*2

Working Temperature: 0℃~65℃

Battery Type: Tattu 12S/14S with AS150U smart batteries ( Upgraded BMS version: TAA16KP12S15C, TAA22K12SP25A, TAPRAS22K1225X, TAPRAS22K1425X)

Output Plug: AS150U

Size: 276*154*216mm

Weight: 6Kg


The control panel is shown below. There is a display screen and push buttons.

  • The screen display area is used to view charger parameters, charging information, etc.
  • The push buttons are used for equipment operation.



In the split-screen display state, long press the "Channel/Return/Start" button to start the charging operation, and long press the "Channel/Return/Start" button or the "Confirm/Set" button to stop operation.

Always stop the charger before disconnecting the battery. Failure to do so may cause internal charger damage.  

Always ensure that the battery is connected properly to the charger. Do not modify the charger or battery in any way and do not attempt to “force” charger function. Failure to follow these instructions may cause fire and or property damage.

If you notice any unusual situation during charging (such as a swollen battery), be sure to stop the charging cycle or disconnect power from the charger.

Our Advantage: 

1.Your orders will be dispatched via FedEx or UPS from the USA directly. 
2.Fast shipping and excellent local after-sale service guaranteed in the USA. 
3.Service-priority in the online shop, like the long warranty period and the lower price. 
4.Energy Density:Specially adapted to each UAV type and RC car/boat/heli type. Very High according to capacity/weight. In fact, we are specialists in High Power Lipo Batteries. It is our unique technology, the highest power of our battery is 100C. Another technology is our batteries are able to be stably discharged simultaneously. 
5.Low IR: Provides stable voltage until the end of your mission. 
6.Safety: Gens Ace and its' partners fulfill the ISO9001, ISO14001, standards.
7.See the battery instruction to the link: Lipo Battery Guide 

Brand: Tattu
Height(±2mm): 216
is featured product: No
Length(±5mm): 276
Net Weight(±20g): 6000
Over 300wh: No
over_power: No
Preorder config: No
sorting: Charger
upc: 889551115735
Width(±2mm): 154
Battery type: LiPo/LiHv
Channels: 2
Balance cells: 6-14 S
Discharge power: MAX 70W*2
Output Current: AC100-240V 50/60Hz
Charging current: AC 110V input: Max 40A; AC 220V input: Max 60A
Input Current: AC
Operating temperature: 0~65 ℃
Storage temperature: -20~60 ℃
Fast charge mode voltage: LiPo: 4.2V LiHv: 4.35V
Manual: TA3000.pdf