Tattu 11.1 v 5200mah Lipo Battery Pack super light and lets you move your battery weight around. This is one of the most comment used batteries for UAV and Drones. Made from strong material for maximum performance. These 11.1 v 5200mah Lipo Battery are the perfect combination of power and weight. It is suitable for the X PlusOne HD Pro.
11.1v 5200mAh 3s lipo Features:
- Stable automatical stacking technology makes the single cell capacity can reach 5200mAh
- The most strict single cell capacity, voltage, resistance, discharge curve matching process
- Superior Japan and Korea Lithium Polymer raw materials.
- Local after-sales service(located in Dublin, CA)
11.1v 5200mAh 3s lipo Specifications:
- Minimum Capacity: 5200mAh
- Configuration: 3S1P / 11.1V / 3 cells
- Discharge Rate: 15C
- Max Burst discharge Rate: 30C
- Net Weight(±20g): 358g
- Dimensions: 133mm x 45mm x 26mm (LWH)
- Balancer Connector Type:JST-XHR-4P
11.1v 5200mAh 3s lipo Capatible with:
Tattu 11.1 v 5200mah Lipo Battery Packs are compatible with most uav and drones. They are suitable for the X PlusOne HD Pro.
|Discharge Rate (C)||15|
|Max Burst discharge Rate (C)||30|
|Discharge Wire Length(mm)||120|
|Balancer Connector Type||JST-XHR-4P|
|Balancer Wire Length(mm)||65|
Old Price: $40.69
$36.62 Special Price
I have just flown our eBee plus fixed wing with this battery (with a slight modification to the cables). The quoted max flight time is 60 min, Even with the new factory supplied battery, we have never achieved more than 45min flight (as normal from the quoted flight time!) I just did a 62-minute flight and landed at 11.0v still in the battery!! Will double check the capacity put back in but could not believe how this battery held up. The discharge was very steady even at the lower voltages including during some aborted landings where the aircraft went to full throttle at the end of the flight. We will be buying a lot more of these!!
Perfect battery, great quality. I recommend this battery...