Amazing Hot Deals
Save Now. Click Here>>.
Tattu 30amp ESC Brushless 2-4S use blheli V16.6 esc firmware with Dshot compatible, superior performance for high-level FPV Racing RC model etc. It's weighted only 3.6g.
Suppot regular 1-2ms pulse width input, as well as Oneshot125(125-250us),
Oneshot42 (41.7-83.3us) , Multshot(5-25us),Dshot150,Dshot 300 and even Dshot600and automatically detected by the ESC
High quality N-FET, half-bridge drive and PCB specialized for cooling, only flashed with BLHeli_S firmware.
Pre-flashed with the settings below.
- Firmware: BLHeli_S V16.6 A-H-20
- Max continuous load: 30 amps
- Burst Current: 40A / 10sec
- Lipo Cells: 2 to 4 cells
- MCU: SILABS EFM8BB2 48MHz
- BEC: No
- Weight: 3.6g (board) 6.5g (total with wires and connectors)
- PCB size: 26mm L*14.5mm W
- ESC height: 6mm
- Signal wire: 150mm
- Power wire: 100mm
|Max continuous load||30 amps|
|Burst Current||40A / 10sec|
|Lipo Cells||2 to 4 cells|
|ESC weight||3.6g (board) 6.5g (total with wires and connectors)|
|PCB size||26mm L*14.5mm W|
Great value for this price Review by JXBD
Quality Price Other
I have 4 of these 30 amp esc brushless for my racing FPV, They work great without any issues and a great value for this price. (Posted on 2/23/2017)
perfectly Review by scotter
Price Other Quality
everything working perfectly,thanks genstattu (Posted on 2/18/2017)